Power System Stabilizer PSS4B Model for Iraqi National Grid using PSS/E Software

  • Hanan Mikhael Habbi College of Engineering-University of Baghdad
  • Ahmed Alhamadani College of Engineering-University of Baghdad


To damp the low-frequency oscillations which occurred due to the disturbances in the electrical power system, the generators are equipped with Power System Stabilizer (PSS) that provide supplementary feedback stabilizing signals. The low-frequency oscillations in power system are classified as local mode oscillations, intra-area mode oscillation, and interarea mode oscillations. Double input multiband Power system stabilizers (PSSs) were used to damp out low-frequency oscillations in power system. Among dual-input PSSs, PSS4B offers superior transient performance. Power system simulator for engineering (PSS/E) software was adopted to test and evaluate the dynamic performance of PSS4B model on Iraqi national grid. The results showed that after installing the PSS in a specific plant the oscillation of rotor angle, bus frequency, speed, power flow is better than without PSS during the disturbances that occurred during the simulations.  All the PSS/E simulation and tests were done in the National dispatch center (NDC) laboratory, Ministry of Electricity.  


How to Cite
HABBI, Hanan Mikhael; ALHAMADANI, Ahmed. Power System Stabilizer PSS4B Model for Iraqi National Grid using PSS/E Software. Journal of Engineering, [S.l.], v. 24, n. 5, p. 29-45, may 2018. ISSN 2520-3339. Available at: <https://jcoeng.edu.iq/index.php/main/article/view/j.eng.2018.05.03>. Date accessed: 24 may 2018. doi: https://doi.org/10.31026/j.eng.2018.05.03.